Husqvarna 545 Mark II Workshop Manual page 25

5. Remove the handle from the product.
6. Assemble the front heated handle in the opposite
sequence to how it was disassembled.
8.7.2 To disassemble and assemble the rear
heated handle
1. Remove the front heated handle, refer to
disassemble and assemble the front heated handle
on page 24 .
2. Remove the chain brake system, refer to
disassemble the chain brake on page 18 .
3. Remove the guide bar and the saw chain.
4. Remove the cylinder cover.
5. Remove the air filter.
6. Remove the air filter holder and the carburetor, refer
To disassemble the carburetor on page 46 .
to
722 - 003 - 26.03.2019
7. Remove the chain catcher to get access to the
screw of the vibration damping system. Loosen the
screw of the vibration damping system.
8. Loosen the screw to the vibration damping system.
To
9. Loosen the deflection limiter.
To
Repair instructions - 25