Husqvarna 545 Mark II Workshop Manual page 31

®
b) On 550 XP Mark II and 550 XP
4. Put the starter in the starter housing.
a) On 545 Mark II and 545G Mark II: Put the starter
pulley (G) against the spring cassette (M). Put
the spring (F) in the starter pulley. Put the pulley
(E) on the spring and attach the screw (D).
722 - 003 - 26.03.2019
®
G Mark II:
545/545G
5. Pull the starter rope up into the notch in the starter
®
b) On 550 XP Mark II and 550 XP
the starter pulley (K) against the spring cassette
(M) and attach the screw (J).
D
E
F
G
H
Q
pulley. Use your thumb and turn the starter pulley 3
turns clockwise to wind the rope on the starter
pulley. Make sure that you can turn the starter pulley
½ turn more when you pull out the starter rope fully.
®
G Mark II: Put
550/550XPG
J
K
H
L
M
N
P
Repair instructions - 31