Husqvarna 545 Mark II Workshop Manual page 50

10. Remove the chain catcher to get access to the
screw of the vibration damping system. Loosen the
screw of the vibration damping system.
11. Remove the screw (P) to get access to the screw of
the vibration damping system. Loosen the screw of
the vibration damping system.
P
12. Remove the two screws as the illustration shows.
50 - Repair instructions
13. Remove the handle from the product.
14. Loosen the deflection limiter.
722 - 003 - 26.03.2019