Rear Panel (Connecting Your Equipment) - Roland JUPITER-Xm Owner's Manual

Panel Descriptions
[PART] button
Chooses part select mode.
[MODEL BANK] button
Chooses sound select mode, allowing you to select sounds of the
various models.
11 MODEL buttons
[1] –[16] buttons
These buttons have various functions depending on the mode.
Sound select mode
The buttons select tones of the models that are assigned to the
buttons.
By holding down the [MODEL BANK] button
[1]–[16] buttons, you can specify the model or the Category that is
assigned.
Part select mode
The buttons switch the current part ([1]–[5]) or turn parts on/off
([6]–[10]).
Various performance functions are assigned to buttons [11]–[16].
For details, refer to "Reference Manual"
Scene select mode
The buttons switch scenes.
By holding down the [SHIFT] button
switch between scene banks 1–16.
Function mode
The buttons select the oscillator to edit ([1]–[4]) or turn oscillators
on/off ([6]–[9]).
Buttons [11]–[16] are assigned the same performance functions as
in Part Select mode.
Step edit mode
The buttons edit each step of the arpeggio that you recorded.
For details, refer to "Editing Individual Steps of the Arpeggio
Performance (STEP EDIT)" (p. 14).
Rear Panel
(Connecting Your Equipment)
* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.
D CTRL jack
E HOLD jack
Expression pedal (EV-5)
Pedal switch (DP series)
A B
C MIDI ports
Connect a MIDI device.
6
and pressing one of
(PDF).
and pressing a button, you can
F AUX IN jack
Connect an audio device.
or
G MIC
Electret microphone
Dynamic microphone
(mono)
12 Others
[MENU] button
The MENU screen appears.
[WRITE] button
Saves sounds and system settings.
[SHIFT] button
If you hold down this button and operate a knob, slider, or button,
the display shows the corresponding edit screen.
* By holding down the [SHIFT] button
controller, you can jump to the edit screen for that parameter.
[SCENE] button
Chooses scene select mode.
[FUNCTION] button
Chooses function mode.
13 Pitch bend/modulation
[PITCH] wheel
This varies the pitch. Moving the wheel toward yourself lowers
the pitch. Moving it away from yourself raises the pitch. When you
release your hand from the wheel, it returns to the center.
[MOD] wheel
This applies vibrato. When the wheel is all the way toward yourself,
no effect is applied. Moving the wheel away from yourself increases
the effect. The wheel does not move from its position when you
release your hand.
I OUTPUT (BALANCED) jacks
Mixer
H OUTPUT jacks
Monitor speaker
(Amplifier built-in)
and operating a knob or other
J PHONES jack
Headphones
K USB port
USB flash drive Computer