Disassembly Of Rear Cover Unit - Canon MV750i E Service Manual

1-22 Disassembly of Rear Cover Unit - 1

(1) Remove the SD Card Sheet and CN101, and detach the LI-MAIN FPC.
(2) Remove a screw (c × 1), and detach the DC P.C.B.
(3) Remove a screw (c × 1), and detach the GND Plate.
(4) Remove a screw (c × 1), and detach the LED Guide and LI P.C.B.
<Note on Reassembling>
(1) Treat the Batt Terminal Ass'y Cable and DC Cable as illustrated.
(2) Attach the SD Card Sheet at the illustrated position. (MV750i E, MV730i E only)
(3) - c
LI-MAIN FPC
MV750i E,
MV730i E Only
SD Card Sheet
c
4.5mm
Metal
M1.7
(self tap)
Note on Reassembling (1)
Batt Terminal Cable (6P)
Take out the red wire of
Batt Terminal Cable.
GND Plate
(3)
(1)
(1)
CN101
(4) - c
DC Cable (3P)
Take out the black, gray and
white wires of Batt Terminal
Cable, and DC Cable.
Fig. 23
26
MV750i E, MV730i E, MV700i E, MV700 E, MV690 E
(4)
(2)
(4)
LED Guide
LI P.C.B.
Note on Reassembling (2)
Guideline for
MV750i E,
attaching
MV730i E Only
Guideline for
attaching
±0.5 mm
LI-MAIN FPC
DISASSEMBLING
DC P.C.B.
(2) - c
±0.5 mm
SD Card Sheet