Canon MV750i E Service Manual page 111

<Notes on Reassembling>
(1) Combine and slide with respect to each other the Tripod Base and C Lock Ass'y until the Open Eject Knob engages with the notch
of C Lock Ass'y, while preventing the D SW FPC Ass'y from leaving the dowel A.
(2) Attach the UL tape (13 × 30) to the main FPC. Insert the main FPC into the CN101, fold it, and attach the UL tape (9 × 25) securely
so that the main FPC will not be unseated.
(3) When mounting the R KEY P.C.B., bend the end of LCD FPC Ass'y as illustrated, and fasten it with dowel B with the bend slipped
under the R KEY P.C.B.
(4) Attach the UL Tape to the positions indicated in the figure.
Note on Reassembling (1)
C Lock Ass'y
Tripod Base
Note on Reassembling (3)
Dowel B
Insert
R KEY P.C.B.
D SW FPC Ass'y
Dowel A
Open Eject Knob
Notch
LCD FPC Ass'y
CN100
Fig. 14
17
MV750i E, MV730i E, MV700i E, MV700 E, MV690 E
Note on Reassembling (2)
UL Tape (9 × 25)
CN101
Bend
Attach to match the flexible cable
contour and "D" letter within error
of ±1 mm.
UL Tape (13 × 30)
MAIN P.C.B. DH2-5154-000
Note on Reassembling (4)
Attach away from the
4 5 1 5 2 -
UL Tape (9 × 25)
UL Tape (13 × 30)
DISASSEMBLING
MAIN FPC
R-KEY P.C.B.
To CN101
mark
C Lock
H D
Ass'y
Attach to match
the C Lock Ass'y
contour within error
of ±1 mm.