1-23 Disassembly of Rear Cover Unit - 2
(1) Remove four screws (l × 4), and detach the Batt Terminal Ass'y.
(2) Detach the Batt Eject Lever and Spring.
Note : Do not lose the Spring.
<Note on Reassembling>
(1) Mount the Batt Terminal Ass'y as illustrated.
<Instruction for Supply>
Sliding part of rail of Batt Eject Lever : Hanarl FL-778 (DY9-3026-010)
Spring : Hanarl FL-778 (DY9-3026-010)
l
3.5mm
Metal
M1.7
(self tap)
(1) - l
Instruction for Supply
Hanarl FL-778
(1) - l
(1) - l
Batt Terminal Ass'y
MV750i E, MV730i E, MV700i E, MV700 E, MV690 E
Rear Cover
(1)
Note on Reassembling (1)
Groove
Black
Red
Pass the white and gray wires through
groove of Rear Cover.
Fig. 24
27
DISASSEMBLING
Spring
(2)
Batt Eject Lever
White
Gray
Groove