Canon MV750i E Service Manual page 22

5-12 Built-in microphone
5-12-1 Wind screen function
5-13 Auxiliary light (MV750i E only)
5-13-1 Lighting mode
5-14 Other additional functions
5-14-1 Time code
5-14-2 Data code
a. Time and date
b. Camera data
5-14-3 Accessory shoe
5-14-4 REC Search mechanism
5-14-5 REC Review
5-14-6 Zero Set Memory
(MV750i E, MV730i E only)
5-14-7 Remote control reception ON/OFF (MV750i E, MV730i E only)
5-14-8 Headphone volume adjustment
5-14-9 16:9 shooting
5-14-10 AEB shooting
5-14-11 Skin detail mode
5-14-12 Still image check time setting
(MV750i E, MV730i E only)
6 Recorder
6-1 Recording functions
6-1-1 Recording format
6-1-2 Tape speed
6-1-3 DV input recording
6-1-4 Analog input recording
6-1-5 Priority of terminals during recording DV terminal > S-Video terminal* > AV terminal (MV750i E, MV730i E, MV700i E only)
6-2 Insert Recording (MV750i E, MV730i E only)
6-2-1 Insert-capable tape
MV750i E, MV730i E, MV700i E, MV700 E, MV690 E
Stereo using electret condenser microphone
Supported ; ON or OFF can be selected (Selected from menu. However, built-in microphone
only.)
Equipped with white LED
Night+ mode : LED is forcibly lighted.
Super Night mode : LED lights depending on brightness of the subject.
Displays recording time (0:00:00 to 7:59:59) and records in sub-code area.
The date and camera information during recording are automatically recorded and can be dis-
played during playback.
Automatic calendar range: January 1, 2004 through December 31, 2030 (the initial setting is
January 1, 2004)
World clock capability (select the name of your destination city and the date and time are auto-
matically adjusted to the local date and time.) Supports daylight savings time.
During playback, time can be displayed in three different modes (date only, time and date, or
time only). (Time and date can be displayed for January 1, 1990 through December 31, 2089.)
Shutter speed and aperture value information are recorded (but not displayed during recording),
and can be displayed during playback.
Supported
Supported. Tape can be played (forward or reverse) by pressing the REC Search button while
camera recording is paused. (When REC Search ends, camera recording is paused again.)
Supported. Accessed by operating the Recording Check button when camera recording is paused
(in Tape mode only).
Supported. This function allows you to rewind or fast-forward the tape to the position where the
WL-D82 Zero Set Memory key is pressed (the counter value is set to 0:00:00). (During record-
ing, only zero setting is allowed. This function can be used in Playback mode.) "
appears at the far right of the counter.
Possible. This can be done in Camera mode and VCR mode (by selecting from menu).
Possible. Adjustable with SET button
Top / bottom expansion system. In Tape mode only
None
When skin areas are detected, they are expressed softly, and the small blemishes, lines, etc.
become unnoticeable. ON or OFF setting possible.
The time used for checking still images can be set after the photo button is pressed and its
operation is released. One of 6 settings; OFF (0 sec), 2, 4, 6, 8 or 10 seconds can be selected as
the setting mode.
Camera shooting and recording, DV input recording*, analog input recording*
* : MV750i E, MV730i E, MV700i E only
Consumer electronics digital DVC (SD specs)
Approx. 18.83 mm / second (in SP mode), approx. 12.57 mm / second (in LP mode)
Complies with IEEE1394.
Records video / audio signals from a digital video camera connected through a DV cable.
Records analog video / audio signals using an S-Video terminal* or AV terminal.
* : MV750i E only
* : MV750i E only
Possible.
SP recording only with tape to be inserted.
20
GENERAL DESCRIPTION OF PRODUCT
" display
M