Canon MV750i E Service Manual page 24

6-7-5 USB terminal (MV750i E, MV730i E only)
6-8 Output signals (MV750i E, MV730i E only)
6-8-1 DV terminal
6-8-2 AV terminal
a. Video signals
Types of signals
Impedance
Signal level
Horizontal resolution
Self-recording/playback
Camera EE OUT
b. Audio signals
Types of signals
Impedance
Signal level
Frequency characteristic
Audio signal S/N
Built-in microphone input
External microphone input
6-8-3 S-Video terminal (MV750i E model only)
Signal configuration
Video signals
Color signal
Impedance
Signal level
Brightness signal S/N
Horizontal resolution
Self recording / playback
Camera EE OUT
6-8-4 Headphone terminal
Output impedance
Signal level
6-8-5 USB terminal (MV750i E, MV730i E only)
USB device class
Compatible computer systems
PC operating system
6-9 Memory card system (MV750i E, MV730i E only)
6-9-1 Types of memory cards used
6-9-2 Recordable image types
a. Still image
In Camera mode
In Card Recording mode
In VCR mode
MV750i E, MV730i E, MV700i E, MV700 E, MV690 E
Complies with USB2.0 FullSpeed class
SD format signals complying with IEEE1394-AV/C protocol
PAL standard color video signals
75 Ω
1 Vp-p (composite)
Approx. 430 TV lines (screen center)
Max. approx. 430 TV lines (screen center)
Stereo audio signal
Min. 40 kΩ
−10 dBv
60 Hz to 16 kHz (Range between 1 kHz standard ±3 dB)
Min. 48 dB
(No microphone terminal)
PAL Y/C separated video signal
1 Vp-p (brightness + synchronization signal)
0.3 Vp-p (Color burst signal)
75 Ω
0.3 Vp-p (Color burst signal)
Min. 45 dB
Conforms to camera EE OUT
Max. approx. 430 TV lines (screen center)
φ 3.5 mm stereo mini jack
47 Ω
−25 dBv (with 16 Ω load at maximum volume)
Complies with USB2.0 FullSpeed class
Independent class, PTP class, mass storage class, audio class, video class
Windows : IBM PC/AT compatible, NEC PC98-NX Series
Macintosh : Power Macintosh, PowerBook, iMac, iBook
Windows : Windows 98, Windows 98SE, Windows ME, Windows 2000, Windows XP
Macintosh : Mac OS 9 or later
SD memory card, Multimedia card
JPEG recording
When [CARD ] is selected for [PHOTO REC] on the [CAM SET UP] menu, still images can be
recorded on the memory card by operating the photo button while motion video is being re-
corded on the tape. (Tape simultaneous recording function : VGA still image)
Still image is recorded using the Photo button (image size and image quality are selectable).
Writing in Progress warning is displayed in the EVF / LCD.
Still image is recorded using the photo button during tape playback (pressed halfway down for
still image playback and pressed all the way down for recording). (VGA still images)
Also, DV input images (when no tape loaded or loaded tape is stopped) can be recorded by
pressing the photo button (pressing halfway captures still image of the DV input, pressing all the
way down records the image).
22
GENERAL DESCRIPTION OF PRODUCT