Voicemail; To Preset Access Codes For Voicemail - NEC UNIVERGE GT890 User Manual

Note:

When the call is picked up, the screen shows the number of call destination (and name when it
registered to contacts).

When the call cannot be picked up, the screen shows "Your call was disconnected by the system
(404)".

Voicemail

This section describes how to use voicemail.
Note:

Previous setting of voicemail access code is required to use voicemail. Access codes are
configured according to your environment. If you are not sure what code to set, contact your
system administrator.

In PBX "DTMF Relay Mode" should be set to "RFC2833" for wireless network.

To preset access codes for voicemail

1. Tap to display the pull-down menu, and tap Settings.
- The Settings screen is displayed.
Figure 149: Display the pull-down menu 2.
132