Use The Message Waiting Indicator - NEC UNIVERGE GT890 User Manual

Tap on to access more symbols.
Note:

To configure keyboard and input options, go to the application menuSettingsBasic
Language & KeyboardKeyboard and Input Methods.

Users could touch and press the key on the keyboard for about 2 seconds to input the alternative
character. For example, touch and press the "+" key for about 2 seconds can get the selection "±".

Use the Message Waiting Indicator

The GT890 message waiting indicator LED is on the upper right corner of the device. It could notify the
users with different messages and status of the phone. Please refer to the status description below. The
priority for the LED indicator is from high to low in the following table. Certain items can be switched
on/off of the LED. See To switch on/off of the Message Waiting Indicator
Color LED Status
Fast Flashing
Flashing
Solid
Fast Flashing
Solid
OFF OFF
Figure 34: English Keyboard - More Symbols
Table 12: GT890 MWI LED Status
Description
Incoming call.
Missed call (s), New voicemail (s).
High memory usage, Maximum contact storage, Network
disconnect.
Upgrading.
The LCD is off.
Normal.
42
.