USB
The phone supports USB connection with USB storage devices. To connect and access a USB storage
device:
1. Insert an USB storage device into USB port at the back.
2. It will take a few seconds for the GT890 to prepare the connection. Then the USB storage icon
will show on the status bar.
3. To access USB storage, go to GT890 MENUFile Manager USB. Tap on it to access and manage
your data.
Note:
USB port is disable on the default setting.
For enable the USB Port, check off the Disable USB Port feature under Web GUISystem
SettingsPreferencesPeripherals interface ManagementDisable USB Port.
Upgrading via USB storage device is not supported on the GT890.
When connecting USB devices, must use PSU or PoE+ to power up phone. For other uses, PoE
is enough sufficient.
When connecting USB devices, select an Android OS compatible product and use it after
confirming its operation.
Figure 294: USB Storage Device Connected to GT890
228