Sd Card - NEC UNIVERGE GT890 User Manual

SD Card

1. Insert your SD card into SD Card slot at the back of the phone. With the side where you can see the
terminal (metal part) of the SD card facing you, insert it in the direction shown in the figure below. Please
make sure the SD Card is inserted with right direction on the phone as indicated on the SD card slot.
2. It will take a few seconds for the phone to prepare the connection. Then the SD Card icon
show on the status bar.
3. To access SD Card, go to GT890 MENUFile ManagerSD card. Tap on it to manage your data.

Firmware upgrade via SD card
For users that could not use remote upgrade or could not access the phone's Web GUI to upload firmware,
upgrading via external SD card is an alternative. Follow the steps below to upgrade GT890 via SD card.
1. Download the firmware file to PC and save it in SD card.
2. Insert the SD card to GT890.
3. GT890 pops up the "Upgrade prompt" window on the screen.
4. Press "OK", it will go into the upgrading process.
5. Power cycle the GT890 and the 5 LCD keys on the bottom of the screen will light up.
6. The GT890 will start upgrading and display the upgrading process in the screen.
7. Wait until the upgrading is done.
8. The GT890 will reboot itself.
9. Check the firmware status and remove the SD card.
Note:
229
SD
card
will