Rinnai BRIVIS Touch Installation Manual page 20

Parameter ID
Number and Installer Parameter Description
Value
(default)
n01 ID23:0 Heating Zone C - Unit
n01 ID24:3 Heating Zone C - Relay
n01 ID25:1 Heating Zone C - Temperature Sensing ID No.
n01 ID26:0 Heating Zone D - Unit
n01 ID27:4 Heating Zone D - Relay
n01 ID28:1 Heating Zone D - Temperature Sensing ID No.
n01 ID43:0 Heating - OFF Cycle Circulation Fan Operation
n01 ID92:0 Multi Set Point Control - Enable
n01 ID93:1 Refrig - Cooling Zone to Force Open
n01 ID105:0 Heating - Enable Fan Scaling
n01 ID106:1 Heating - Common Zone Fan Speed
n01 ID107:1 Heating - Zone A Fan Speed
n01 ID108:1 Heating - Zone B Fan Speed
n01 ID109:1 Heating - Zone C Fan Speed
n01 ID110:1 Heating - Zone D Fan Speed
n01 ID111:0 Refrig - Enable Fan Scaling
n01 ID112:1 Refrig - Common Zone Fan Speed
n01 ID113:1 Refrig - Zone A Fan Speed
n01 ID114:1 Refrig - Zone B Fan Speed
n01 ID115:1 Refrig - Zone C Fan Speed
n01 ID116:1 Refrig - Zone D Fan Speed
Installer Parameter
Value Settings
Heater ID No.
Relay No. 1 to 4
Sensor No. 1 to 4
Heater ID No.
Relay No. 1 to 4
Sensor No. 1 to 4
0 = OFF; 1 = ON
0 = OFF; 1 = ON
0 = None; 1=A; 2=B; 3=C; 4=D
0 = OFF; 1 = ON
Range = 1 to 16
Range = 1 to 16
Range = 1 to 16
Range = 1 to 16
Range = 1 to 16
0 = OFF; 1 = ON
Range = 1 to 16
Range = 1 to 16
Range = 1 to 16
Range = 1 to 16
Range = 1 to 16
20
Please record
the values you
have set