SECTION 6 – OPERATION
When you press the OPER. button while the chiller-
heater is stopped, or STOP while the chiller-heater is
operating, a confirmation message appears. Press YES
or NO depending on whether you want to continue or
cancel your selection.
• Screen Name Buttons - Each screen includes
buttons for changing screens. The button that is
lit indicates which screen you are on. They are lo-
cated along the bottom of the screen.
92
CHANGE NUMERIC VALUES
Many numeric values, such as the set point and the
ranges on the Trend screen, can be changed. Here's
how:
1. Touch the number to be changed. A numeric key-
pad appears.
LD21476a
2. Enter the new value on the keypad.
3. Press the ENT button to set it.
FORM 155.32-ICOM1.EN.GB
ISSUE DATE: 10/13/2017
LD21154a
JOHNSON CONTROLS