Cisco ASR 907 Installing page 10

Hide thumbs Also See for ASR 907:

Table of Contents

Installing the Chassis in the Air Plenum

Figure 10: Plenum Assembly to 23-inch Rack

Installing the Chassis in the Air Plenum

Note

Ensure that the router is not installed in the Air Plenum while mounting it on the rack.

For instructions on mounting the air plenum on the rack.

Procedure

Step 1

Position the chassis so that the rear of the chassis is at the front of the plenum. See the figure below.

Step 2

Slide the chassis into the plenum so that the front of the chassis is in flush with the mounting rails and brackets.

Installing the Cisco ASR 907 Router

Table of Contents