Destination Address - Cisco NCS 1004 Command Reference Manual

Commands

destination address

To specify the destination address for Smart Call Home, use the destination address command in the call
home profile configuration mode.
destination address address
Syntax Description
address
None
Command Default
Call home profile configuration mode
Command Modes
Command History
Release
Release
7.0.1
You must configure the DNS server before setting-up the call-home destination address as FQDN. Use domain
Usage Guidelines
name-server {DNS server IP} command to configure the DNS server on the device.
The following example shows how to specify the destination address for Smart Call Home.
domain name-server 64.102.6.247
call-home
service active
contact smart-licensing
profile CiscoTAC-1
active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
Specifies the destination address for Smart Call Home.
The format is {http|https}://{FQDN}/its/service/oddce/services/DDCEService
FQDN must be either Cisco Smart Software Manager FQDN (tools.cisco.com) or Smart Licensing
satellite server FQDN.
Modification
This command was introduced.
Command Reference for Cisco NCS 1004
destination address
19