Signalling Refresh Out-Of-Band Interval - Cisco NCS 1004 Command Reference Manual

Commands

signalling refresh out-of-band interval

To specify the out-of-band refresh interval for RSVP, use the signalling refresh out-of-band interval
command in RSVP controller configuration mode.
signalling refresh out-of-band interval interval
Syntax Description
interval
45 seconds
Command Default
RSVP controller configuration
Command Modes
Command History
Release
Release
7.0.1
This command applies only to the RSVP sessions associated with GMPLS UNI tunnels.
Usage Guidelines
Example
The following example shows how to specify 200 seconds for the out-of-band interface refresh
interval.
RP/0/RP0/CPU0:ios(config)#rsvp
RP/0/RP0/CPU0:ios(config-rsvp)#controller Optics0/0/0/0
RP/0/RP0/CPU0:ios(config-rsvp-ctrl)#signalling refresh out-of-band interval 200
RP/0/RP0/CPU0:ios(config-rsvp-ctrl)#
Specifies the refresh interval (180-86400 seconds).
Modification
This command is
introduced.
signalling refresh out-of-band interval
Command Reference for Cisco NCS 1004
101