Programming a Macro Key
1.
On the remote control, press and hold SETUP
SETUP
until the mode LED blinks twice.
Enter 9 9 5. The mode LED blinks twice.
2.
Select a macro key (for example, F1) and
3.
press it once. The mode LED blinks once.
4.
Press the key sequence you want to program
into the macro. For example, to turn on your
TV and raise its volume, press TV, POWER,
VOL+, VOL+, VOL+....
NOTE:
You can program up to 15 key presses into one
macro.
5.
Press and hold SETUP until it blinks twice.
Now the macro is saved to the assigned macro
SETUP
key.
6.
To add another macro, repeat steps 1 through
5 for the other macro key and the new key
sequence that you wish to assign to that
macro key.
NOTE:
Programming more than five macros on the
same macro key overwrites previous settings.
Clearing a Macro Key
On the remote control, press and hold SETUP
1.
SETUP
until it blinks twice.
Enter 9 9 5. The mode LED blinks twice.
2.
3.
Press the macro key you want to clear once.
Press and hold SETUP until the mode LED
4.
blinks twice.
SETUP
This macro key is now clear and ready for
reprogramming (see "Programming a Macro Key" on
www.urcsupport.com
18