Learning Precautions; Programming A Learned Key - Universal Electronics Atlas DVR/PVR 5-Device User Manual

Learning Precautions

• Your original remote controls must be in working
order for learning to work properly.
• Learned keys are mode-specific, so each one can
store a unique function for each mode.
• Do not use the following keys for learning: Device
Keys, SETUP, Record (•), Tune-In Keys.
• Learning capacity is approximately 16 to 25 keys,
depending on the code being learned.
• Certain device functions are not learnable including
multi-frequency types, some high frequency ones,
and other unusual formats.
• For optimum learning, avoid high levels of ambient
light such as natural sunlight or energy-efficient
fluorescent lights.
Please have your original remote controls
NOTE:
handy before programming learning.

Programming a Learned Key

NOTE: If more than 15 seconds pass between key
presses, the remote exits programming.
Press and hold SETUP until the last-selected
1.
mode key blinks twice, then press 9 7 5.
NOTE: If the LED displays one long flash instead,
either your batteries are low, or the Atlas DVR/
PVR 5-Device Universal Remote Control with
Learning has a memory fault. In either case,
the remote will not learn a new key. See "Addi-
tional Information" on page 24.
Press a mode key once (i.e., AUX, DVD, AUD,
2.
TV, or CBL) to assign a mode for learning, then
the key that will learn the new code.
3. Place the Atlas DVR/PVR 5-Device Universal
Remote Control with Learning head-to-head
(about 2" apart) from your original remote
control. Also locate the key (on your original
remote control) that you want the Atlas DVR/
PVR 5-Device Universal Remote Control with
Learning to learn.
www.urcsupport.com
2"
13