Table of Contents
Advertisement
•
Learning capacity is approximately 16 to 25 keys,
depending on the code being learned.
•
Certain device functions are not learnable including
multi-frequency types, some high frequency ones,
and other unusual formats.
•
For optimum learning, avoid high levels of ambient
light such as natural sunlight or energy-efficient
fluorescent lights.
Please have your original remote controls
NOTE:
handy before programming learning.
Programming a Learned Key
NOTE:
If more than 10 seconds pass between key
presses, the remote exits programming.
1.
Press and hold SETUP until the last-selected
mode key blinks twice, then press 9 7 5.
SETUP
NOTE:
If the LED displays one long flash instead,
either your batteries are low, or the Titan
Remote Control has a memory fault.
Press a mode key once (i.e., AUX, DVD, AUD,
2.
TV, or STB) to assign a mode for learning.
3.
Place the Titan Remote Control head-to-head
(about 2" apart) from your original remote
control.
4.
Press the key on your Titan remote control
that is supposed to learn the new code. The
mode LED begins blinking rapidly. On the
original remote, press and hold the key to be
learned. Continue holding the key on the
original remote until the Titan Remote
Control's LED blinks twice.
NOTE:
If the LED on the Titan remote displays one
long blink, a learning error has occurred. Try
repeating this step again until a successful
capture occurs. If the function is still not
captured, press and hold SETUP to exit pro-
gramming and review the "Learning Precau-
www.urcsupport.com
12
2"
Hide quick links:
Advertisement
Table of Contents
