Programming The Power Key - Universal Electronics MILLENNIUM 4 User Manual

Millennium 4 Mnl M4094 rev
PROGRAMMING THE POWER KEY FOR
ALL ON/OFF (CABLE MODE ONLY)
With the Millennium 4, you can program the POWER
key to turn all of your equipment on and off with the
press of one button in the Cable mode. In other modes,
individual power control is retained, so you can still
power on or off your TV,VCR or DVD player, or audio
component independently.
1. On the Millennium 4, press CBL once. Press
and hold SETUP until the LED blinks twice,
then release SETUP.
2. Enter 9 - 9 - 5. The LED will blink twice.
3. Press POWER once.
4. Enter the following sequence*:
a. Press CBL once, then POWER once.
b. Press TV once, then POWER once.
c. Press VCR once, then POWER once.
d. Press AUDIO once, then POWER once.
e. Finally, press CBL once.
5.
Press and hold SETUP until the LED blinks
twice, then release SETUP.
6. Now, when you press CBL once and then press
POWER once, the Millennium 4 will direct
power to your cable converter, TV,VCR or DVD
player, and audio component and leave the
remote control in the Cable mode.
* NOTE: If you do not want all of your equipment to power up
all of the time, you can shorten step 4 to include only those
devices you want to turn on or off. For example, to just power
up your TV and Cable Converter, enter the following sequence
for step 4:
a. Press CBL once, then POWER once.
b. Press TV once, then POWER once.
c. Finally, press CBL once.
Now when you press CBL once and then press POWER once,
the Millennium 4 will only direct power to your Cable converter
and TV, and still leave the remote control in the Cable mode.
12/27/02 11:00 AM
26
Page 26