Locking Channel Control For Specific Device Modes - Universal Electronics Titan M2056-C User Manual

Enter 9 7 3. The mode LED (e.g., TV) blinks
2.
twice.
Press CH+ once. The mode LED (e.g., TV)
3.
blinks once.
4. Press the mode key for the device that you
want to use for channel-changing. The mode
LED blinks twice.
Now, regardless of what mode you select, the channel
keys will only change channels on the assigned device.

Locking Channel Control for Specific Device Modes

To set Channel Lock for some device modes, but not
others, you must first follow the steps under "Unlocking
Channel Control" on page 17. Then follow the steps
below:
1. Press the mode key that corresponds to the
device you wish with to command for
channel-changing functions. The mode LED
(e.g., TV) blinks once.
Press and hold SETUP until the mode LED
2.
SETUP
(e.g., TV) blinks twice.
Enter 9 7 3. The mode LED (e.g., TV) blinks
3.
twice.
4. Press each mode key that you do not use for
channel-changing functions. These are the
modes in which the channel-changing
functions will control the device related to the
mode key you pressed in step 1. Any mode
omitted from this step has all channel controls
assigned to that mode's device.
Press SETUP to save. The mode LED blinks
5.
SETUP
twice.
www.urcsupport.com
16