Locking Channel Control To Cbl; Changing Volume Lock; Unlocking Volume Control For A Single Device (Individual Volume Unlock) - Universal Electronics Atlas DVR/PVR 5-Device User Manual

Locking Channel Control to CBL

1. On the remote control, press CBL once; it will
blink once. Press and hold SETUP until the
CBL key blinks twice.
2. Enter 9 7 3.The CBL key will blink twice.
3. Press CH+ once. The CBL key will blink twice.
Now, regardless of what mode you select (except AUD),
the channel keys will only change channels on your cable
converter.

CHANGING VOLUME LOCK

Volume Lock allows you to control the volume through
the device identified as having your primary speaker(s),
regardless of which mode you are using. On the Atlas
DVR/PVR 5-Device Universal Remote Control with
Learning, Global Volume Lock is set to TV, so you can
control TV volume while in the AUX, DVD, TV or CBL
mode. You can perform Individual Volume Unlock on a
selected device to set its volume control for independent
operation.
NOTE:
The audio mode's (AUD) volume controls are
active regardless of Volume Lock settings.
However, if you lock the volume controls to
the AUD mode, you will have control of the
audio device's volume in all other modes (i.e.,
AUX, DVD, TV, and CBL). This can be an advan-
tage if, for example, you always listen to home
entertainment devices through your receiver's
speakers.
Unlocking Volume Control for a Single Device
(Individual Volume Unlock)
1. Assuming Global Volume Lock is active, select
a mode on the remote control that you want to
unlock (e.g., CBL) and press it once. Next,
press and hold SETUP until the device key
blinks twice.
Enter 9 9 3. The last-selected device key will
2.
blink twice.
www.urcsupport.com
16