Using The Master Power Key; Programming The Master Power Key - Universal Electronics Atlas DVR/PVR 5-Device User Manual

USING THE MASTER POWER KEY

The Atlas DVR/PVR 5-Device Universal Remote Control
with Learning has a unique feature that allows you to
sequentially turn up to five of your home entertainment
devices on or off with a single key press.
NOTE: MASTER POWER (PWR) only works in the CBL
mode. If it is not programmed, only the cable
converter will turn on or off. In any other
mode, pressing MASTER POWER (PWR) once
will turn the selected device on or off.

Programming the Master Power Key

On the remote control, press and hold SETUP
1.
until the last-selected device key blinks twice.
2. Enter 9 9 5. The last-selected device key
blinks twice.
3. Press PWR once.
4. For the first device you want in the power on
sequence, press a device key (e.g., CBL) once.
Then press PWR once.
5. Repeat step 4 up to four more times to add the
second, third, fourth, and fifth device, as
desired.
6. To save the settings and exit the program:
a. Press CBL once.
b. Press and hold SETUP until the CBL key blinks
twice.
Using the Master Power Key
1. After programming, point the remote control
at the devices. Press CBL once.
2. Press PWR once to sequentially turn the
programmed home entertainment devices on
or off.
You will see the devices turn on or off according to the
programmed sequence.
www.urcsupport.com
20