Pairing The Headphones With A Bluetooth Device - Sennheiser MOMENTUM Wireless M3AEBTXL Instruction Manual

Using the headphones
14 | MOMENTUM Wireless M3AEBTXL
Pairing the headphones with a Bluetooth
device
1. Switch the headphones on (> 16) and place them close to the
Bluetooth device (max. 20 cm).
2. Press and hold the voice assistant button for 5 seconds until you
hear the voice prompt "Pairing".
The LED flashes blue and red. The headphones are in pairing
mode.
3. Activate Bluetooth on your Bluetooth device.
4. Via the menu of your Bluetooth device, start the search for new
Bluetooth devices.
All active Bluetooth devices in the proximity of your Bluetooth
device are displayed.
5. From the list of found Bluetooth devices, select "MOMENTUM 3".
If necessary, enter the default pin code "0000".
If pairing was successful, you hear the voice prompts "Pairing
successful" and "Device (1) connected". The LED lights up blue for
2 seconds.
1
OFF
2
Pairing
"Pairing"
Hold
5s
If no connection is established within 5 minutes, pairing mode
is terminated and the headphones switch to standby mode. If
necessary, repeat the steps described above.
ON
Click
3 4
Menu Menu
Bluetooth on Add Device
Bluetooth off
Connected
2s
< 20 cm
5
*** MOMENTUM 3
***
MOMENTUM 3
Keyword: 0000
"Pairing
successful"
"Device (1)
connected"