Pairing The Headphones - Sennheiser CX SPORT Instruction Manual

Getting started
14 | CX SPORT

Pairing the headphones

CAUTION
Danger of malfunction!
The transmitted radio waves of mobile phones can impair the
operation of sensitive and unprotected devices.
Only make calls with the headphones in locations where
X
Bluetooth wireless transmission is permitted.
The CX SPORT In-Ear Wireless headphones comply with the Bluetooth 4.2
standard.
When you switch the headphones on for the first time, they automatically
go to pairing mode. If the headphones have already been paired with a
few devices, they automatically try to connect to the two most-recently
connected Bluetooth devices. The headphones can save the connection
profiles of up to eight Bluetooth devices or smartphones.
If you pair the headphones with a ninth Bluetooth device, the saved
connection profile of the least used Bluetooth device will be overwritten.
If you want to re-establish a connection with the overwritten Bluetooth
device, you have to pair the headphones again.
To pair and connect the headphones to a PC or Mac, it is recommended
to use a Sennheiser Bluetooth USB dongle, such as the BTD 800 USB.
paired +
connected
paired