Using The Headphones - Sennheiser CX 150BT SEBT2 Instruction Manual

Using the headphones

Using the headphones
Information on the rechargeable battery
and the charging process
The headphones have a built-in rechargeable battery. A complete
charging cycle takes approx. 1.5 hours. Before using the headphones
for the first time, charge the rechargeable battery for a complete
charging cycle without interruption.
When the headphones are being charged, the LED lights up
When the battery charge drops to a critical level, a voice prompt asks
you to recharge the headphones ("Recharge headset").
Sennheiser recommends using the supplied USB cable and a com-
patible standard USB power supply for charging the headphones.
Charging the headphones' rechargeable
battery
USB-C
1. Connect the USB-C connector of the USB cable to the USB-C socket
of the headphones.
2. Connect the USB-A connector to a corresponding socket of a USB
power source (to be ordered separately). Make sure that the USB
power source is connected to the power supply system.
The charging process of the headphones begins. The LED displays
the charge status:
LED
flashes red
lights up red
lights up
purple
lights up blue
USB-A
Meaning
Rechargeable battery is being charged
(charge level is very low)
Rechargeable battery is being charged
(charge level approx. 50%)
Rechargeable battery is being charged
(charge level approx. 75%)
Rechargeable battery is fully charged
(> 6).
1,5 HRS
CX 150BT | 9