Putting The Headphones On And Adjusting The Headband; Retrieving Information On The Battery Charge Status - Sennheiser MOMENTUM Wireless M3AEBTXL Instruction Manual

Putting the headphones on and adjusting
the headband
For good sound quality and best possible wearing comfort, the head-
band can be adjusted to properly fit your head.
▷
Wear the headphones so that the headband runs over the top of
your head. The markings
can be found in the ear cups.
▷
Move the ear cups up or down the headband slider until:
– your ears are comfortably covered by the ear pads,
– you feel even, gentle pressure around your ears,
– a snug fit of the headband on the head is ensured.
For optimal sound quality and active noise cancellation ANC, the
ear pads must completely surround your ears.
Retrieving information on the battery
charge status
When the headphones are connected to your Bluetooth device, the
battery charge status can be displayed on the screen of your smart-
phone (depending on the device and operating system used).
The Smart Control app also displays the battery charge status.
On the headphones, you can check the battery charge status via the
voice prompts (not possible during a call):
▷
Press and hold the multi-function button for 2 seconds.
Voice prompt
"Recharge headset"
"More than xx % battery
left"
Hold
R for the right side and
Meaning
The rechargeable battery is empty.
Recharge the rechargeable battery (>
10).
In addition, the LED flashes red.
The remaining battery charge is
displayed as a percentage.
"recharge
headset"
2s
„More than xx %
battery left"
MOMENTUM Wireless M3AEBTXL | 19
Using the headphones
L for the left side