Product overview
8 | MOMENTUM Wireless M3AEBTXL
Notes on voice prompts
The headphones output voice prompts for various functions (see
examples below). Using the Smart Control app, you can change the
language of the voice prompts, choose between voice prompts and
beep sounds, or deactivate the status messages with a few excep-
tions (e.g. rechargeable battery is empty).
Voice prompt
"Power on"
"Power off"
"Device (1) (2) connected"
"No connection"
"Pairing"
"Pairing successful"
"No device found"
"Volume min"
"Volume max"
"Call rejected"
"Call ended"
"Mute on"
"Mute off"
"More than xx % battery left" Rechargeable battery has the
"Recharge headset"
Notes on vibration prompts
The headphones output vibration prompts for the following func-
tions.
Event
Incoming call
Locating the headphones
using the TILE app
Meaning/headphones
switched on
switched off
are connected to device 1 or 2
not connected via Bluetooth
are in Bluetooth pairing mode
Bluetooth pairing successful
cannot connect to a paired device
volume set to minimum
volume set to maximum
incoming call rejected
call ended
Microphone is muted, active call is
put on hold
Microphone is reactivated
stated charge level
Rechargeable battery is empty.
Recharge the headphones.
Comment
Headphones vibrate only when not
put on.
Using the TILE app you can make
the registered MOMENTUM 3
vibrate to locate it when it is nearby
(> 28).