Adjusting The Bobbin Winding Switch - ELNA 6200 Service Manual

ADJUSTING THE BOBBIN WINDING SWITCH

ADJUSTING THE BOBBIN WINDING SWITCH
ADJUSTING THE BOBBIN WINDING SWITCH ADJUSTING THE BOBBIN WINDING SWITCH ADJUSTING THE BOBBIN WINDING SWITCH
1. ENTER ADJUSTING MODE.
2. REMOVE THE TOP COVER (SEE PAGE 5).
3. LOOSEN THE SETSCREWS TO ADJUST THE POSITION OF THE SWITCH FIXING PLATE.
THE LED SHOULD SHOW "][" WHEN THE BOBBIN WINDER SPINDLE IS SET TO THE BOBBIN
WINDING POSITION, AND/OR "||" WHEN THE BOBBIN WINER SPINDLE IS RETURNED TO THE
SEWING POSITION.
4. TIGTEN THE SETSCREW.
5. ATTACH THE TOP COVER.
TO ENTER ADJUSTING MODE
1. TURN THE POWER ON WHILE
PRESSING THE "–" OF ZIGZAG
WIDTH BUTTON AND "+" OF STITCH
LENGTH BUTTON.
BOBBIN WINDING SHAFT
SETSCREWS
SWITCH FIXING PLATE
2. PRESS THE "+" OF STITCH
LENGTH BUTTON TO SELECT
"9".
(BOBBIN WINDING OFF) (BOBBIN WINDING ON)
35
ON
OFF