ELNA 6200 Service Manual page 9

REPLACING THE FRONT COVER (UNIT)
TO REMOVE:
REMOVE THE FACE COVER (UNIT), TOP COVER (UNIT) AND BELT COVER. (SEE PAGE 4, 5, 6)
LOOSEN THE SETSCREWS (A), (B) AND (C). THEN REMOVE THE FRONT COVER (UNIT). DISCONNECT
THE CONNECTOR FOR PRINTED CIRCUIT BOARD-F AND FLEXIBLE FLAT CABLE FROM THE PRINTED
BOARD-A.
NOTE:
NEVER PULL ON CORD WHEN DISCONNECT THE CABLES FROM THE CIRCUIT BOARD.
TO ATTACH:
FOLLOW THE PROCEDURE IN REVERSE.
SERVICE ACCESS (5)
SETSCREW (A)
SETSCREW (C)
SETSCREW (B)
SETSCREW (B)
CONNECTOR FOR
BOBBIN WINDING
SWITCH
FRONT COVER
FLEXIBLE FLAT CABLE
8
SETSCREW (A)
SETSCREW (C)