Flow Connections of the Column Compartment
When working with solvents please observe appropriate safety procedures (for
WA R N I N G
example, goggles, safety gloves and protective clothing) as described in the
material handling and safety data sheet supplied by the solvent vendor, especially
when toxic or hazardous solvents are used.
Preparations
Parts required
1 Press release buttons and remove front cover to gain
access to heater area.
For more information on column identification, see
1200 Series TCC User Manual
Install the column compartment
Other modules
Parts from accessory kit, see
Two wrenches 1/4 – 5/16 inch for capillary connections
2 The column compartment is equipped with an
column-identification system that can read column tags.
Antennas
Column tag
"Column-Identification System"
Installing the Column Compartment
"Accessory Kits"
on page 85
Column clip
on page 15.
3
39