Lateral Supports - Fitting & Operation - Invacare Spectra Plus User Manual

THE LATERAL SUPPORTS CAN ONLY BE FITTED TO THE FIRM UPHOLSTERED BACKREST
ASSEMBLY (VISCOUNT SEATING).
To attach the lateral supports to the back of the backrest assembly follow these instructions.
Remove the existing pan-head screws from the top of each flange shown in Fig 1. Marked (A). The
lower screws of each flange remain in place.
Fig 1.
With the longer screws provided attach the
With the longer screws provided attach the
support rail to the backrest through the flanges
support rail to the backrest through the flanges
into the screw inserts. Do not screw into the
into the screw inserts. Do not screw into the
backboard. Tighten securely, but do not
backboard. Tighten
overtighten as this may damage the screw-
overtighten as this may damage the screw
threaded inserts.
threaded inserts.
With the support rails secured, slide the lateral
With the support rails secured, slide the lateral
support into the support rail from the bottom.
support into the support rail from the bottom.
Adjust to the occupant's requirements and firmly
Adjust to the occupant's requirements and firmly
tighten the hand wheel (B). tighten the hand wheel (B).
LATERAL SUPPORT
FITTING INSTRUCTIONS
securely, but do
Fig 2.
Line up the
support rail with
the holes in the
backrest as
shown in Fig 2
not
27