OPTIONAL BACK UP BATTERY INSTALLATION If back up batteries are either flat or not fitted, speed dial numbers will last one hour after the FP098 is unplugged from the telephone jack. 1. Remove the screw from the battery compartment cover Batteries are from underneath the FP098 using a phillips screwdriver.
LOCATION OF CONTROLS & CONNECTIONS Handset Base Unit Handset Hookswitch Store button Rear of Base Unit Handset volume control M1 button M2 button Visual ringer RINGER VOLUME Ringer HI/LO switch LINE jack In use indicator M3 button M4 button Handset Retainer Tab M5 button M6 button...
INSTALLATION WALL MOUNTING You can mount your phone directly on a wall. Before mounting your phone, consider the following: • Select a location away from electrical cables, pipes or other items behind the mounting location that could cause a hazard when inserting screws into the wall.
Redial If you need to call the last number dialed, simply pick up the handset and press If any button is Flash - Call Waiting pressed before , the last If the Call Waiting tone sounds while you are on a call - number will New Zealand: Press not redial.
On certain occasions (such as telephone banking), after dialing one number, last one hour you may wish to dial another number without hanging up. This is known as after the FP098 chain dialing or cascade dialing. is unplugged Simply store the second number in another speed dial location. During your from the call, press the first speed dial button.
ELEMENT OF WARRANTY: Uniden warrants to the original retail owner for the duration of this warranty, its FP098 (herein after referred to as the Product), to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below.