Connecting To Your Tv; Reducing Pixellation - Uniden UDW-10003 User Manual

Connecting to Your TV

You can connect the receiver to any standard television with RCA composite video inputs.
To use bandwidth efficiently, the system compresses the video signal using Motion-JPEG; the
system then digitizes the signal before transmitting it to provide a secure video link. This method
is optimized for wireless connections, but it can cause an indented image line ("ghosting" or JPEG
artifacts) on larger television displays or plasma screens.

Reducing pixellation

When video is put on a very large screen, you can often see the edges of each pixel in the image.
There are a few ways to reduce the amount of pixellation on your TV:
Zoom out on the receiver: at the zoomed in size, some pixellation will always occur.
►
Don't use a television larger than 32 inches (32-inch diagonal display).
►
Don't use a "stretch" or "zoom" setting on your television; set your television to display the
►
image as it receives it from the system.
12
Television with standard RCA Television with standard RCA
composite inputs (maximum 32 composite inputs (maximum 32
inches diagonal recommended) inches diagonal recommended)
AV out AV out
AC adapter AC adapter
(already connected) (already connected)
Audio Audio
(white) (white)
Video Video
(yellow) (yellow)