Replacing A Front Turn Signal Light Bulb; Replacing An Auxiliary Light Bulb - Yamaha Nouv AT135 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing a front turn signal
light bulb
If a front turn signal light bulb burns out,
replace it as follows.
1. Remove cowling A (if replacing the
left turn signal light bulb) or cowl-
ing B (if replacing the right turn sig-
nal light bulb). (See page 7-6. For
removal and installation proce-
dures.)
2. Remove the turn signal light sock-
et (together with the bulb) by turn-
ing it counterclockwise.
3. Remove the defective bulb by pull-
ing it out.
7
ZAUU0418
1. Front turn signal light bulb
EAUU0430 4. Insert a new bulb into the socket.
5. Install the turn signal light socket
(together with the bulb) by turning
it clockwise.
6. Install the cowling.
1
Replacing an auxiliary light
bulb
This model is equipped with two auxil-
iary lights. If an auxiliary light bulb
burns out, replace it as follows.
1. Remove cowling C. (See page 7-6
2. Remove the auxiliary light socket
ZAUU0419
1. Auxiliary light bulb
3. Remove the burnt out bulb by pull-
4. Insert a new bulb into the socket.
7-33
for removal and installation proce-
dures.)
(together with the bulb) by turning
it counterclockwise.
1
ing it out.
EAUU0441