Replacing A Headlight Bulb - Yamaha Nouv AT135 Owner's Manual

1
3
2
ZAUU0413
1. Starter relay
2. Fuse
3. Spare fuse
4. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amper-
age rating than recommended
to avoid causing extensive
damage to the electrical sys-
tem and possibly a fire.
Specified fuse:
10 A
5. Place the starter relay into the
original position.
PERIODIC MAINTENANCE AND ADJUSTMENT
6. Install the starter relay cover by in-
stalling the screw.
7. Turn the key to "ON" and turn on
the electrical circuits to check if the
devices operate.
8. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
[EWA15131]

Replacing a headlight bulb

If a headlight bulb burns out, replace it
as follows.
NOTICE
_
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with
alcohol or thinner.
_
ZAUU0415
1. Cowling C
7-30
EAUU0121
ECA10660
7
1