PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
3
4
5. Place a new bulb into position,
and then secure it with the bulb
5
holder.
6
7
8
9
a
a. Do not touch this area.
cC
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the
bulb, and the bulb life will be
adversely
affected.
Thoroughly
clean off any dirt and fingerprints
on the headlight bulb using a cloth
moistened with alcohol or thinner.
6. Install the bulb cover, and then
connect the headlight coupler.
7. Install the panel.
8. Have a Yamaha dealer adjust
the headlight beam if necessary.
6-35
Replacing a front turn signal
light bulb
1. Place the scooter on the center-
stand.
2. Remove panel A. (See page
6-11 for panel removal and
installation procedures.)
EC000105
EAU03111