Replacing The Tail/Brake Light Bulb - Yamaha Nouv AT135 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
1. Place the motorcycle on the cen-
terstand.
2. Remove cowling C. (See page 7-6
for removing procedure.)
ZAUU0416
1. Headlight bulb cover (x2)
3. Remove the headlight bulb cover
by turning it counterclockwise.
7
4. Remove the headlight bulb holder
by pushing it inward and turning it
counterclockwise, and then re-
move the bulb.
1
ZAUU0417
1. Headlight bulb holder
5. Place a new bulb into position, and
then secure it with the bulb holder.
1. Do not touch the glass part of the bulb.
6. Install the cowling.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
Replacing the tail/brake light
1
bulb
1. Open the seat. (See page 4-9.)
2. Remove the panel by removing
ZAUU0420
1. Rear panel
2. Screw (x2)
3. Rubber cap
7-31
the screws, and then pulling the
panel outward.
3
2
EAUU0451
1