Change The Registration; Pre-Programmed Memory Locations - Johannus Symphonica 35 User Manual

4.10

Change the registration

The 0 button cancels registrations at two levels:


4.11

Pre-programmed memory locations

Pre-programmed memory locations are available through the operating
buttons PP to T. These six memory locations have factory settings
(presets) appropriate for the quiet pianissimo to the loud tutti.
Retrieve a pre-programmed memory location
1.
Programme a pre-programmed memory location
1. Select the required stops.
2. Press the SET button. Hold the button.
3. Press the required pre-programmed memory location (PP-T).
4. Release the pre-programmed memory location button (PP-T).
5. Release the SET button.
Briefly press the 0 button: This cancels only the last change.
Press the 0 button for a long time: All registrations are cancelled.
Press a pre-programmed memory location (PP-T). The active stops
light up.
The current setting of the pre-programmed memory location will
be lost.
Programming the pre-programmed memory location is limited to
the text on the button. For example, it is not advisable to
programme a pianissimo registration under the tutti button.
18