Working With Memory Pistons; Saving Your Settings In A Memory; Recalling Your Settings; Cancel Function - Johannus One User Manual

Working with Memory Pistons

12
The ONE provides Memory Pistons that allow you to store almost all
settings (or registrations) you make on the front panel. You can save your
settings in 12 memories (4 memories x 3 banks).
Additional registrations can be stored or loaded directly from an external
USB Memory.
MEMO
You can recall the single registration via MIDI. See "Recalling
Memories via MIDI" (p. 38).

Saving Your Settings in a Memory

1.
Set the tilt tabs, buttons and other functions so that you
hear the combination of sounds you want to store.
2.
Press [M1, M2 or M3] piston to select the memory bank
you want to save.
The piston you selected lights.
3.
Hold down the [1,2,3,4] piston that corresponds to the
memory where you wish to save your settings.
The memory piston you selected flashes and then lights steady to
indicate that the registration was saved.
NOTE
The settings previously saved in this memory will be overwritten
by your new registration.

Recalling Your Settings

1.
If necessary, press the [M1, M2 or M3] piston to select the
bank that contains the settings you need.
2.
Press [1]~[4] piston to load the registration of the
corresponding memory.

Cancel Function

This function is useful to quickly switch off all tilt tabs and orchestral
sounds.
1.
Press the [0] piston.
AMERICAN
ENGLISH
FRENCH
GERMAN
Exporting a Registration Set to an USB
STRINGS CHOIR
Memory
This procedure lets you export the 12 registrations in a file into USB
PIANO HARPSICHORD
Memory. This function may be useful as a backup of your work.
You can save up to 12 registration set (12 files) into a USB Memory.
1.
2.
TUNING
FINE PRESET
3.
MANUAL I
All tilt tabs and orchestral button switch off.
BOURDON 8 VIOLA DI GAMBA 8 VOX CELESTE 8
GEDACT 8 SALICIONAL 8 VOIX CELESTES II
BOURDON 8 SALICIONAL 8 VOIX CELESTES II
HOHLFLÖTE 8 QUINTATÖN 8 BLOCKFLÖTE 4
Insert an USB Memory to save your data. See "Connecting
an USB Memory (commercially available)" (p. 18).
Press and hold the [FUNCTION/EXIT] button.
TEMPERAMENT
SCALE
466 EQUAL
444 PYTHAGOREAN
442 MEANTONE
440 YOUNG II
432 KIRNBERGER III
415 VALLOTTI
392 WERCKMEISTER III
The [FUNCTION/EXIT] button flashes to indicate that we are in
function mode. All other indicators go dark.
Press the lower part of the "2" tilt tab to select the EXPORT
MEMORY function.
Now you have to choose in which "location" (file) of the USB
memory you want save.
You can save up to 12 registration set (files) in to USB Memory. Each
location is selectable through the [M1]~[M3] and [1]~[4] memory
pistons.
For example, if you want to save the set in the location 1.1, you have
to select [M1] and [1] memory piston. If you want to save in the
location 3.2, press the [M3] and [2] memory piston. The possible 12
location are [1~3].[1~4].
NOTE
When you save a registration set into USB memory, it will
ROHRFLUTE 4 NASARD 2 2/3 WALDFLUTE
CHIMNEY FLUTE 4 VIOLA 4 BLOCK FLUTE
FLÛTE OCTAVIANTE 4 NAZARD 2 2/3
QUINTE 2 2/3 WALDFLÖTE 2
CHORD
ENHANCER
33
OCTAVIN 2
QUINTE 1 1/