Couplers; Changing The Registration; Pitch - Johannus STUDIO I User Manual

Handleiding_Studio_Final01.fm Page 11 Tuesday, April 19, 2005 10:14 AM
4.4

Couplers

4.5

Changing the registration

The 0-button cancels registration in two ways:
4.6

Pitch

The standard pitch is: A = 440 Hz. You can change the pitch with the TUNE
button or the TRANS button in combination with the buttons P, MF, FF, M1,
M2, M3 and 0. The TUNE button is for the fine adjustment of the pitch. The
TRANS button is for shifting the pitch by half-tone increments. The table
below provides an overview of the pitch change as a result of various button
combinations:
/i
Tune
Trans.
Manual coupler: Couples all of the keys for the swell stops to the great
stops. Use the accessory Swell organ - Great organ to activate the
Manual coupler.
Pedal coupler: Couples all of the keys for the great stops or the swell
stops to the pedal. Use the accessory Great organ - Pedal or Swell organ
- Pedal to activate the pedal.
Manual Bass (MB): Couples one note from the great stops to the pedal.
Only the lowest note that is played on the great stops is coupled to the
pedal. Activate the manual bass with the MB button.
A short press on the 0-button: Only the last change is cancelled.
A long press on the 0-button: All stops are cancelled. The accessories
Chorus and Intonation 2 are unaffected.
P MF
-3 Hz -2 Hz -1Hz
-1½ -1
tone tone tone
FF M1 M2
440 Hz +1Hz +2 Hz
-½ 0 +½
tone tone
M3 0
+3 Hz
+1 +1½
tone
11