Procedure One
Procedure Two
DOOR
FRONT
DOOR
FRONT
W218SE1A
--------·---------
Procedure Three
W219SE1A
Figure 11
13
11. AGITATOR
a. Open loading door.
b. Remove agitator by placing two agitator hooks.
No. 254P4P, under bottom edge of agitator,
Figure 12.
IMPORTANT: Hooks should be positioned 180
degrees of each other, and must be placed under
agitator vane for greater stability. If hooks are
placed between vane area, agitator damage may
occur.
c. Using a rocking motion (back and forth)
carefully lift agitator off drive bell.
NO. 254P4P
AGITATOR
HOOKS
AGITATOR
Figure 12
RS3100002
(37400R3)
Rev.3