Tone Dialing Switch-Over; Voice Mail Waiting Indicator - Uniden EXI5660 Series Owner's Manual

Tone Dialing Switch-over

If your telephone company requires pulse dialing, you can temporarily switch over to tone
dialing after the call connects. This feature is useful when you need tone dialing to use
automated such as telephone bank tellers, telephone prescription refills, customer support
menus, etc.
If your phone is set to pulse dialing mode, make your call normally. Once your call
connects, press [ /tone/ ]. Any digits you enter from then on will be sent as tone dialing.
When this particular call ends, the phone automatically returns to pulse dialing mode.

Voice Mail Waiting Indicator

If you subscribe to voice mail service through your local telephone company, you can use your cordless telephone to
access your voice mailbox. The voice mail company will provide you with the access number.
The charge/in use LED on the base of your phone flashes whenever you have messages waiting in your voice
mailbox.
To access your voice mailbox
Just dial the access number supplied by your voice mail provider to enter your mailbox.
You can program your voice mail access number to a speed dial number.
If the voice mail waiting indicator remains on after you have retrieved your messages, press and hold [find hs] for
5 seconds. This will reset the indicator.
27