Battery Replacement And Handling; Cleaning The Battery Charging Contacts - Uniden EXI5660 Series Owner's Manual

Exi5660 series
Hide thumbs Also See for EXI5660 Series:
Table of Contents

Advertisement

Battery replacement and handling

Recharge your phone on a regular basis by returning the handset to the base after each phone call. When the
operating time becomes short even after a battery is recharged, please replace the battery. With normal usage, your
battery should last about one year. To order replacement batteries, please contact Uniden's Parts Department. The
contact information is listed on the back cover page.
Warning:
To avoid the risk of personal injury or
property damage from fire or electrical
shock, only use the Uniden battery
model and Uniden adapter model
specifically designated for this product.

Cleaning the battery charging contacts

To maintain a good charge, clean the charging contacts on the handset once
a month. Dampen a cloth with plain water. Gently rub the damp cloth over the
charging contacts until all visible dirt is removed. Dry the contacts thoroughly
before returning the handset to the base.
Caution
Do not use paint thinner, alcohol, or other chemical products. Doing so
may discolor the surface of the telephone and damage the finish.
Caution
• Use only the specified Uniden battery pack (BT-905).
• Do not remove the battery from the handset to charge it.
• Never throw the battery into a fire, disassemble it, or heat it.
• Do not remove or damage the battery casing.
4

Advertisement

Table of Contents
loading

Table of Contents