Making A Call From The Caller Id List - Uniden EXI5660 Series Owner's Manual

2) Enter the number ( [0] – [9] ), or press [ ] or [ ] to select the speed dial number you would like to dial.
) Press [talk/flash]. TALK and the volume setting and the number selected appear on the
display. Then the displayed number is dialed.
Note: You can also press [talk/flash] before you access the speed dial memory.
When you come to the phone number you want to dial, press [select].
To cancel speed dialing
Press [end] to return to standby. If accessing the list during an active call, you can press [mem] to exit the list
immediately. If no key is pressed for 0 seconds, the handset will exit the speed dial list automatically.
Note: Pressing [end] to exit the speed dial list during a call will disconnect the call immediately.

Making a Call from the Caller ID List

You can place a call directly from the Caller ID list.
) Press [cid/menu] in standby. Use [ ] or [ ] to select the phone number that you want to
dial.
2) To have the phone dial a "" before the displayed Caller ID number, press [1]. To have the
phone dial the stored area code before the displayed Caller ID number, press [3].
) Press [talk/flash]. The displayed phone number dials automatically.
Note:
• You can also press [talk/flash] before you access the Caller ID list. When you come to the phone
number you want to dial, press [select].
• You cannot make a call from the Caller ID list if your cordless telephone is connected to a private
branch exchange (PBX).
24