Uniden EXI5660 Series Owner's Manual page 13

) Make sure that the charge/in use LED illuminates. If the LED does not
illuminate, check to see that the AC adapter is plugged in and that the
handset makes good contact with the base's charging contacts.
Note:
• Connect the AC adapter to a continuous power supply (not
controlled by a wall switch).
• Place the base unit close to the AC outlet to avoid long
extension cords.
• Charge your handset at least 15 - 20 hours before plugging into
the phone line.
4) Once the handset battery pack is fully charged, connect the telephone line
cord to the TEL LINE jack and a telephone outlet. If your telephone outlet
isn't modular, contact your telephone company for assistance.
Modular Modular
2