Table of Contents
Advertisement
Installation Guide
14 Pin Connector
Pink
Channel 4 Output
Green
(-) Door Input
Blue
(-) Hood Input
Purple
(+) Door Input
Brown
(+) Siren Output
White
(+) Park lights
Blk/White
(+/-) Dome Light
Blk/White
(+/-) Dome Light
Orange
(-) When Armed
Grey
(-) Trunk Release
Yellow
Ignition Input
Black
Ground Input
Red
Main Power Input
4 Pin Connector Red
Green
Door Lock
Red
12 Volt Output
Blue
Door Unlock
Pink
Second Unlock
2 Pin Connector Blue
Plug-in Program Button Connector.
The program Button is used to access the systems Programming Menu's.
See page 5. for installation instructions.
2 Pin Connector Red
Plug-in LED Connector.
See page 5. for installation instructions.
3 Pin Connector White
Green
(-) When Disarmed
Pink
Horn / Channel 5.
Blue
(+) Disconnect
4 Pin Connector White
Blue
Sensor Full Warn
Green
Sensor Pre Warn
Black
Ground Output
Red
12 Volt Output
Second 4 Pin Connector White
Satellite link connector.
WIRING CONNECTORS
Programmable - See menu 2, setting 5.
Negative door pin switch input.
Negative input from hood pin switch.
Positive door pin switch input.
Positive output for siren.
Park light output. Programmable - menu 2, setting 3.
Dome light supervision. See page 5.
Dome light supervision. See page 5.
Negative output when system is armed.
Negative output for trunk release. 500ma max.
Input from vehicles ignition wire.
System ground input.
Constant 12 Volt input.
Door Lock Output - Programmable - menu 1, setting 3.
Output for voltage inverter.
Door Unlock Output - Programmable - menu 1, setting 3.
Second Unlock Output - Programmable - menu 1, setting 3
Negative output when disarmed.
Programmable - See menu 2, setting 7
Triggers when 12volt circuit is broken.
Input trigger for addition alarm sensor(s)
Input trigger for addition alarm sensor(s)
Ground output for addition alarm sensor(s)
12 volt output for additional alarm sensor(s)
Low Current Only
5
Advertisement
Table of Contents
