Position Settings - Balluff BTL5-T110 Series Technical Description

BTL5-T110...
Configuration and Profibus Connection –
Transducer Class 3/4
5 Node configuration (cont.)
5.2.2 Max. tolerated number of
lifesign errors
This parameter is used to specify
the maximum permissible number
of successive absences of the
master lifesign, which is only rele-
vant for DP-V2 clock-synchronous
mode.
5.3

Position settings

5.3.1 Code sequence
The "Code Sequence" (measuring
direction) parameter specifies
whether the minimum value or the
maximum value is at the connector
end of the transducer.
12
english
Fig. 5-3: Number of lifesign errors
Fig. 5-4: Code Sequence